Categories

700 Series Microliter Syringes. Hamilton

700 Series Microliter Syringes. Hamilton

Manufacturer: Hamilton Company
Family Part #: HAMILTON TSI-8-D1

Add to cart

TS Part No. Old Part No. Mfg Part No. Description Price Online Price Quantity
CONTEC TSI-PCHS S7900-1 TSI-PCHS This lightweight, 100% polyester interlock knit wiper has a non-abrasive edge that allows 100% utilization of wiper. Laser-cut, which seals fibers at wiper's edge. Soft textured wiper cleans surfaces without scratching. Laundered and packaged in an ISO Class 4 cleanroom. Extremely low in both particles and extractables. Good sorbency with solvents and chemical resistant. Certificate of Sterility is available. Shipping weight: 25 Lbs.
$19.80
$16.75
EACH
CONTROL TSI-1004-1 S7900-8 TSI-1004-1 Set this ruggedly-built, mechanical compact timer from 1 to 120 minutes. A loud, 5-second ring signals elapsed time for all lab tests. Moving pointer always shows time remaining to zero. The modern design and compact size is only 2-3/4 x 2-3/4 x 2 inches. Weight is just 3-3/8 ounces. Made from high- impact ABS plastic construction makes it resistant to lab chemicals and virtually indestructible. The speed-read dial is graduated with oversized markings for easy reading. Selecting the time automatically winds the timer. May be viewed from above or stands upright on the lab bench. Powerful spring ensures 99% accuracy.
$55.00
$46.54
EACH
CONTROL TSI-1009-1 S7900-3 TSI-1009-1 Cat. No. 1009 Slide Holder Cabinet, 1 Drawer Steel cabinet stores 100 slide holders, a total of 400 slides. Dimensions: 5-1/8 x 6-1/4 x 16-1/4 inches. Cat. No. 1075 Slide Holder Cabinet, 2 Drawer Steel cabinet stores 200 slide holders, a total of 800 slides. Dimensions: 5-1/8 x 12-1/2 x 16-1/4 inches.
$35.00
$29.62
EACH
CONTROL TSI-1021-1 S7900-15 TSI-1021-1 The Traceable® Bench Timer has a range of 0.001 second to 999 hours. Precise timing and an eight-digit, 1/2-inch-high, bright-intensity LED display make it the choice for all industrial and biomedical tests. Reads in four different formats: 99 hours, 59 minutes, 59 seconds, 99 hundredths; 99999.999 seconds; 9999.9999 minutes; and 999.99999 hours. Ultra-high stability and sealed quartz-crystal provide precision timing immune to AC line fluctuations. If the power fails, a 9-volt backup battery continues timing until power is restored. To assure accuracy an individually serial-numbered Traceable® Certificate is provided from the manufacturer's ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and Technology). Fulfills ISO 9000 requirements. Reads to 0.001 second and is accurate to 0.001%. The Bench Timer features four timing modes: single-action, time-in/-out, cumulative-split, and interval-split. Up to 12 different events may be timed simultaneously. An audible up-alarm may be set to signal on each channel. Space-station feel and sound are produced by a keystroke of just 3/8-inch and an audible click. The Bench Timer is housed in an attractive, high-impact ABS plastic case designed for hard laboratory use. Supplied with Traceable® Certificate and 9-volt battery. For use with 120 VAC. Size is 6-5/8 x 4-3/4 x 3-1/2 inches. Weight is 1-1/4 pounds. Replacement battery Cat. No. CON1112.
$40.00
$33.85
EACH
CONTROL TSI-1025-1 S7900-9 TSI-1025-1 The three-line display simultaneously shows running time, cumulative split, and interval split. Sixty memories recall all splits, display sample numbers 1-60, and show interval split longest, shortest, and average times. The stopwatch times run to 9 hours, 59 minutes, 59 seconds, 99 hundredths. Accuracy is to 0.001%. The unit provides stopwatch functions of single action, time-in/-out, continuous timing, cumulative split, interval split, 60 memories, and programmable timing. Also provides repeat functions of countdown alarm timing. Set it to count down at any time from 10 hours to 1 second. When zero is reached, the timer alarms and begins to count down again from the programmed time. Repeat cycle continues automatically until stopped. To assure accuracy an individually serial-numbered Traceable® Certificate is provided from the manufacturer's ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and Technology). As a chronograph, the stopwatch displays time-of-day, date, and day of the week. It also has a time-of-day alarm. Size is 2-1/8 x 2-5/8 x 3/4 inches. Weight is 2 ounces. The Stopwatch comes supplied with Traceable® Certificate, 2- year battery, and lanyard. Replacement battery: Cat. No. CON1005.
$48.00
$40.62
EACH
CONTROL TSI-1037-1 S7900-10 TSI-1037-1 Workhorse LCD digital stopwatch reads times up to 24 hours. In the stopwatch mode, it provides single-action, time-out, cumulative-split, and continuous timing. Resolution is 0.01 second. Accuracy is 0.001% or 0.01%. As a chronograph, the unit displays time-of-day in hours, minutes, and seconds, AM/PM, date, and day of the week. Also has a time-of-day alarm. Extra-tough ABS plastic shockproof construction makes the unit ideal for lab and plant use. To assure accuracy an individually serial-numbered Traceable® Certificate is provided from the manufacturer's ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and Technology). Stopwatch size is 2-3/8-inch diameter x 5/8-inch and weight is 1-1/2 ounces. Supplied complete with 2-year always-on battery, Traceable® Certificate, and lanyard. Replacement battery Cat. No. CON1104.
$55.00
$46.54
EACH
CONTROL TSI-1043-1 S7900-5 TSI-1043-1 Three-Button Stopwatch is so inexpensive that it's the first disposable stopwatch. Appropriate for easy-duty, occasional-use needs where high precision is not a requirement. At only 7/8 ounces, it's the lightest of all stopwatches. Wear it around your neck on the 38-inch lanyard and never know it's there. To assure accuracy an individually serial-numbered Traceable® Certificate is provided from the manufacturer's ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and Technology). The stopwatch times run to 24 hours with a resolution of 1/100 of a second for 30 minutes and 1 second thereafter. Functions are single-action, time-out, cumulative-split, and continuous roll over timing. It also displays time and date. Provides a sound confirmation each time a button is pressed. Accuracy is 0.1%. Supplied with a Traceable® Certificate, 1-year battery, and lanyard. Size is 2-1/8-inch diameter x 5/8-inch. Replacement battery Cat. No. CON1104.
$47.00
$39.77
EACH
CONTROL TSI-1045-1 S7900-17 TSI-1045-1 General-purpose LCD Digital Stopwatch times to 24 hours. Features include: single-action, time-out, cumulative-split, and continuous timing. Timing resolution is 1/100 of a second for the first 30 minutes, then continues timing to 23 hours, 59 minutes, 59 seconds, with a 1-second resolution. As a chronograph, the unit displays time-of-day in hours, minutes, and seconds, AM/PM, date, and day of the week. Also has a time-of-day alarm. Tactile-feel, click switches provide a positive action. Accuracy is 0.01%. Digits are 1/4-inch-high. Stopwatch is 2-1/8 x 2-3/8 x 1/2 inches and weight is 1 ounce. To assure accuracy an individually serial-numbered Traceable® Certificate is provided from the manufacturer's ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and Technology). Supplied also with, 2-year always-on battery and lanyard. Replacement battery Cat. No. CON1039.
$54.00
$45.69
EACH
CONTROL TSI-1047-1 S7900-11 TSI-1047-1 LCD Digital Stopwatch reads time up to 24 hours. Accuracy is 0.001%.Utility unit has complete stopwatch functions and full chronographfeatures. In the stopwatch mode it provides single-action, time-out,cumulative split, and continuous timing. Resolution is to 0.01 second. Toassure accuracy an individually serial-numbered Traceable® Certificate isprovided from the manufacturer's ISO 17025 calibration laboratoryaccredited by A2LA. It indicates traceability to standards provided by NIST(National Institute of Standards and Technology). The extra-large displayis 3/8-inch for ease in reading. The stopwatch times run to 29 minutes, 59seconds, 99 hundredths. For times exceeding half an hour, the unitautomatically goes into an expanded range and times up to 23 hours, 59minutes, and 59 seconds. As a chronograph, the unit displays time-of-day inhours, minutes, and seconds, AM/PM, date, and day of the week. Also has atime-of-day alarm. Extra-tough ABS plastic shockproof construction makesthe unit ideal for lab and plant use. Size is 2-3/8 x 5/8 inches. Weight is1-1/2 ounces. Comes complete with 2-year, replaceable silver-oxide batteryand lanyard. Replacement battery Cat. No. CON1039.
$70.00
$59.23
EACH
CONTROL TSI-1051-1 S7900-12 TSI-1051-1 The Traceable® Jumbo-Digit Stopwatch with its handy clip has the largest stopwatch digits ever developed (1/2-inch-high) providing ease in reading. Stopwatch times extend up to 24 hours. Unit features single-action, time- out, cumulative-split, and continuous timing. Timing resolution is 1/100 of a second for the first 30 minutes, continues timing to 23 hours, 59 minutes, 59 seconds with a 1-second resolution. Accuracy is 0.001%. To assure accuracy an individually serial-numbered Traceable® Certificate is provided from the manufacturer's ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and Technology). Water-resistant, O-ring- sealed, and shock-resistant ABS plastic case has non-slip rubber sides‚Äìideal for lab and plant use. The unit comes supplied with a detachable clip for clipping onto notebooks or clipboards. Also comes with Velcro™ for vertical mounting anywhere. As a chronograph, the unit displays time-of-day in hours, minutes, and seconds, AM/PM, date, and day of the week. It also has a time-of-day alarm. Stopwatch is 3 x 2-1/2 x 7/8 inches and weight is 2-1/2 ounces. Supplied complete with Traceable® Certificate, 2-year, always-on battery, lanyard, and clip.
$73.00
$61.77
EACH
HAMILTON 80300 S7900-1 80300 10µl Syringe for Calibration Standards, 701N
$19.80
$19.80
EACH
HAMILTON 80301 80301 Style: Luer Tip (no needle) Model No.: 701LT Gauge: N/A Capacity (µl): 10
$36.00
$30.46
EACH
HAMILTON 80330 S7900-7 80330 Style: Removable Needle Model No.: 701RN Gauge: 26s Capacity (µl): 10
$40.00
$33.85
EACH
HAMILTON 80336 S8020-2 80336 Style: Small Removal Needle Model No.: 701RN Gauge: 26s Capacity (ul): 10
$215.40
$215.40
PACK of 6
HAMILTON 80400 S7900-2 80400 Style: Cemented Needle Model No.: 702N Gauge: 22s Capacity (µl): 25
$35.00
$29.62
EACH
HAMILTON 80400 S7900-2 80400 Style: Cemented Needle Model No.: 702N Gauge: 22s Capacity (µl): 25
$35.00
$29.62
EACH
HAMILTON 80401 80401 Style: Luer Tip (no needle) Model No.: 702LT Gauge: N/A Capacity (µl): 25
$38.00
$32.15
EACH
HAMILTON 80430 S7900-8 80430 Style: Removable Needle Model No.: 702RN Gauge: 22s Capacity (µl): 25
$55.00
$46.54
EACH
HAMILTON 80500 S7900-3 80500 Style: Cemented Needle Model No.: 705N Gauge: 22s Capacity (µl): 50
$35.00
$29.62
EACH
HAMILTON 80501 S7900-15 80501 Style: Luer Tip (no needle) Model No.: 705LT Gauge: N/A Capacity (µl): 50
$40.00
$33.85
EACH
HAMILTON 80530 S7900-9 80530 Style: Removable Needle Model No.: 705RN Gauge: 22s Capacity (µl): 50
$48.00
$40.62
EACH
HAMILTON 80600 S7900-4 80600 Style: Cemented Needle Model No.: 710N Gauge: 22s Capacity (µl): 100
$40.00
$33.85
EACH
HAMILTON 80601 HAM 80601 80601 Style: Luer Tip (no needle) Model No.: 710LT Gauge: N/A Capacity (µl): 100
$54.00
$45.69
EACH
HAMILTON 80630 S7900-10 80630 Style: Removable Needle Model No.: 710RN Gauge: 22s Capacity (µl): 100
$55.00
$46.54
EACH
HAMILTON 80700 S7900-5 80700 Style: Cemented Needle Model No.: 725N Gauge: 22s Capacity (µl): 250
$47.00
$39.77
EACH
HAMILTON 80701 S7900-17 80701 Style: Luer Tip (no needle) Model No.: 725LT Gauge: N/A Capacity (µl): 250
$54.00
$45.69
EACH
HAMILTON 80730 S7900-11 80730 Style: Removable Needle Model No.: 725RN Gauge: 22s Capacity (µl): 250
$70.00
$59.23
EACH
HAMILTON 80800 S7900-6 80800 Style: Cemented Needle Model No.: 750N Gauge: 22s Capacity (µl): 500
$51.00
$43.15
EACH
HAMILTON 80801 HAM 80801 80801 Style: Luer Tip (no needle) Model No.: 750LT Gauge: N/A Capacity (µl): 500
$56.00
$47.38
EACH
HAMILTON 80801 HAM 80801 80801 Style: Luer Tip (no needle) Model No.: 750LT Gauge: N/A Capacity (µl): 500
$56.00
$47.38
EACH
HAMILTON 80830 S7900-12 80830 Style: Removable Needle Model No.: 750RN Gauge: 22s Capacity (µl): 500
$73.00
$61.77
EACH
HAMILTON 87900 S7900-A 87900 Style: Cemented Needle Model No.: 75N Gauge: 26s Capacity (µl): 5
$35.00
$32.50
EACH
HAMILTON 87930 87930 Style: Removable Needle Model No.: 75RN Gauge: 26s Capacity (µl): 5
$55.00
$51.07
EACH
HAMILTON 87930 87930 Style: Removable Needle Model No.: 75RN Gauge: 26s Capacity (µl): 5
$55.00
$51.07
EACH
TS Part No. CONTEC TSI-PCHS
Old Part No. S7900-1
Mfg Part No. TSI-PCHS
Description This lightweight, 100% polyester interlock knit wiper has a non-abrasive edge that allows 100% utilization of wiper. Laser-cut, which seals fibers at wiper's edge. Soft textured wiper cleans surfaces without scratching. Laundered and packaged in an ISO Class 4 cleanroom. Extremely low in both particles and extractables. Good sorbency with solvents and chemical resistant. Certificate of Sterility is available. Shipping weight: 25 Lbs.
Price $19.80
Online Price
$16.75
Quantity
EACH
TS Part No. CONTROL TSI-1004-1
Old Part No. S7900-8
Mfg Part No. TSI-1004-1
Description Set this ruggedly-built, mechanical compact timer from 1 to 120 minutes. A loud, 5-second ring signals elapsed time for all lab tests. Moving pointer always shows time remaining to zero. The modern design and compact size is only 2-3/4 x 2-3/4 x 2 inches. Weight is just 3-3/8 ounces. Made from high- impact ABS plastic construction makes it resistant to lab chemicals and virtually indestructible. The speed-read dial is graduated with oversized markings for easy reading. Selecting the time automatically winds the timer. May be viewed from above or stands upright on the lab bench. Powerful spring ensures 99% accuracy.
Price $55.00
Online Price
$46.54
Quantity
EACH
TS Part No. CONTROL TSI-1009-1
Old Part No. S7900-3
Mfg Part No. TSI-1009-1
Description Cat. No. 1009 Slide Holder Cabinet, 1 Drawer Steel cabinet stores 100 slide holders, a total of 400 slides. Dimensions: 5-1/8 x 6-1/4 x 16-1/4 inches. Cat. No. 1075 Slide Holder Cabinet, 2 Drawer Steel cabinet stores 200 slide holders, a total of 800 slides. Dimensions: 5-1/8 x 12-1/2 x 16-1/4 inches.
Price $35.00
Online Price
$29.62
Quantity
EACH
TS Part No. CONTROL TSI-1021-1
Old Part No. S7900-15
Mfg Part No. TSI-1021-1
Description The Traceable® Bench Timer has a range of 0.001 second to 999 hours. Precise timing and an eight-digit, 1/2-inch-high, bright-intensity LED display make it the choice for all industrial and biomedical tests. Reads in four different formats: 99 hours, 59 minutes, 59 seconds, 99 hundredths; 99999.999 seconds; 9999.9999 minutes; and 999.99999 hours. Ultra-high stability and sealed quartz-crystal provide precision timing immune to AC line fluctuations. If the power fails, a 9-volt backup battery continues timing until power is restored. To assure accuracy an individually serial-numbered Traceable® Certificate is provided from the manufacturer's ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and Technology). Fulfills ISO 9000 requirements. Reads to 0.001 second and is accurate to 0.001%. The Bench Timer features four timing modes: single-action, time-in/-out, cumulative-split, and interval-split. Up to 12 different events may be timed simultaneously. An audible up-alarm may be set to signal on each channel. Space-station feel and sound are produced by a keystroke of just 3/8-inch and an audible click. The Bench Timer is housed in an attractive, high-impact ABS plastic case designed for hard laboratory use. Supplied with Traceable® Certificate and 9-volt battery. For use with 120 VAC. Size is 6-5/8 x 4-3/4 x 3-1/2 inches. Weight is 1-1/4 pounds. Replacement battery Cat. No. CON1112.
Price $40.00
Online Price
$33.85
Quantity
EACH
TS Part No. CONTROL TSI-1025-1
Old Part No. S7900-9
Mfg Part No. TSI-1025-1
Description The three-line display simultaneously shows running time, cumulative split, and interval split. Sixty memories recall all splits, display sample numbers 1-60, and show interval split longest, shortest, and average times. The stopwatch times run to 9 hours, 59 minutes, 59 seconds, 99 hundredths. Accuracy is to 0.001%. The unit provides stopwatch functions of single action, time-in/-out, continuous timing, cumulative split, interval split, 60 memories, and programmable timing. Also provides repeat functions of countdown alarm timing. Set it to count down at any time from 10 hours to 1 second. When zero is reached, the timer alarms and begins to count down again from the programmed time. Repeat cycle continues automatically until stopped. To assure accuracy an individually serial-numbered Traceable® Certificate is provided from the manufacturer's ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and Technology). As a chronograph, the stopwatch displays time-of-day, date, and day of the week. It also has a time-of-day alarm. Size is 2-1/8 x 2-5/8 x 3/4 inches. Weight is 2 ounces. The Stopwatch comes supplied with Traceable® Certificate, 2- year battery, and lanyard. Replacement battery: Cat. No. CON1005.
Price $48.00
Online Price
$40.62
Quantity
EACH
TS Part No. CONTROL TSI-1037-1
Old Part No. S7900-10
Mfg Part No. TSI-1037-1
Description Workhorse LCD digital stopwatch reads times up to 24 hours. In the stopwatch mode, it provides single-action, time-out, cumulative-split, and continuous timing. Resolution is 0.01 second. Accuracy is 0.001% or 0.01%. As a chronograph, the unit displays time-of-day in hours, minutes, and seconds, AM/PM, date, and day of the week. Also has a time-of-day alarm. Extra-tough ABS plastic shockproof construction makes the unit ideal for lab and plant use. To assure accuracy an individually serial-numbered Traceable® Certificate is provided from the manufacturer's ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and Technology). Stopwatch size is 2-3/8-inch diameter x 5/8-inch and weight is 1-1/2 ounces. Supplied complete with 2-year always-on battery, Traceable® Certificate, and lanyard. Replacement battery Cat. No. CON1104.
Price $55.00
Online Price
$46.54
Quantity
EACH
TS Part No. CONTROL TSI-1043-1
Old Part No. S7900-5
Mfg Part No. TSI-1043-1
Description Three-Button Stopwatch is so inexpensive that it's the first disposable stopwatch. Appropriate for easy-duty, occasional-use needs where high precision is not a requirement. At only 7/8 ounces, it's the lightest of all stopwatches. Wear it around your neck on the 38-inch lanyard and never know it's there. To assure accuracy an individually serial-numbered Traceable® Certificate is provided from the manufacturer's ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and Technology). The stopwatch times run to 24 hours with a resolution of 1/100 of a second for 30 minutes and 1 second thereafter. Functions are single-action, time-out, cumulative-split, and continuous roll over timing. It also displays time and date. Provides a sound confirmation each time a button is pressed. Accuracy is 0.1%. Supplied with a Traceable® Certificate, 1-year battery, and lanyard. Size is 2-1/8-inch diameter x 5/8-inch. Replacement battery Cat. No. CON1104.
Price $47.00
Online Price
$39.77
Quantity
EACH
TS Part No. CONTROL TSI-1045-1
Old Part No. S7900-17
Mfg Part No. TSI-1045-1
Description General-purpose LCD Digital Stopwatch times to 24 hours. Features include: single-action, time-out, cumulative-split, and continuous timing. Timing resolution is 1/100 of a second for the first 30 minutes, then continues timing to 23 hours, 59 minutes, 59 seconds, with a 1-second resolution. As a chronograph, the unit displays time-of-day in hours, minutes, and seconds, AM/PM, date, and day of the week. Also has a time-of-day alarm. Tactile-feel, click switches provide a positive action. Accuracy is 0.01%. Digits are 1/4-inch-high. Stopwatch is 2-1/8 x 2-3/8 x 1/2 inches and weight is 1 ounce. To assure accuracy an individually serial-numbered Traceable® Certificate is provided from the manufacturer's ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and Technology). Supplied also with, 2-year always-on battery and lanyard. Replacement battery Cat. No. CON1039.
Price $54.00
Online Price
$45.69
Quantity
EACH
TS Part No. CONTROL TSI-1047-1
Old Part No. S7900-11
Mfg Part No. TSI-1047-1
Description LCD Digital Stopwatch reads time up to 24 hours. Accuracy is 0.001%.Utility unit has complete stopwatch functions and full chronographfeatures. In the stopwatch mode it provides single-action, time-out,cumulative split, and continuous timing. Resolution is to 0.01 second. Toassure accuracy an individually serial-numbered Traceable® Certificate isprovided from the manufacturer's ISO 17025 calibration laboratoryaccredited by A2LA. It indicates traceability to standards provided by NIST(National Institute of Standards and Technology). The extra-large displayis 3/8-inch for ease in reading. The stopwatch times run to 29 minutes, 59seconds, 99 hundredths. For times exceeding half an hour, the unitautomatically goes into an expanded range and times up to 23 hours, 59minutes, and 59 seconds. As a chronograph, the unit displays time-of-day inhours, minutes, and seconds, AM/PM, date, and day of the week. Also has atime-of-day alarm. Extra-tough ABS plastic shockproof construction makesthe unit ideal for lab and plant use. Size is 2-3/8 x 5/8 inches. Weight is1-1/2 ounces. Comes complete with 2-year, replaceable silver-oxide batteryand lanyard. Replacement battery Cat. No. CON1039.
Price $70.00
Online Price
$59.23
Quantity
EACH
TS Part No. CONTROL TSI-1051-1
Old Part No. S7900-12
Mfg Part No. TSI-1051-1
Description The Traceable® Jumbo-Digit Stopwatch with its handy clip has the largest stopwatch digits ever developed (1/2-inch-high) providing ease in reading. Stopwatch times extend up to 24 hours. Unit features single-action, time- out, cumulative-split, and continuous timing. Timing resolution is 1/100 of a second for the first 30 minutes, continues timing to 23 hours, 59 minutes, 59 seconds with a 1-second resolution. Accuracy is 0.001%. To assure accuracy an individually serial-numbered Traceable® Certificate is provided from the manufacturer's ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and Technology). Water-resistant, O-ring- sealed, and shock-resistant ABS plastic case has non-slip rubber sides‚Äìideal for lab and plant use. The unit comes supplied with a detachable clip for clipping onto notebooks or clipboards. Also comes with Velcro™ for vertical mounting anywhere. As a chronograph, the unit displays time-of-day in hours, minutes, and seconds, AM/PM, date, and day of the week. It also has a time-of-day alarm. Stopwatch is 3 x 2-1/2 x 7/8 inches and weight is 2-1/2 ounces. Supplied complete with Traceable® Certificate, 2-year, always-on battery, lanyard, and clip.
Price $73.00
Online Price
$61.77
Quantity
EACH
TS Part No. HAMILTON 80300
Old Part No. S7900-1
Mfg Part No. 80300
Description 10µl Syringe for Calibration Standards, 701N
Price $19.80
Online Price
$19.80
Quantity
EACH
TS Part No. HAMILTON 80301
Old Part No.
Mfg Part No. 80301
Description Style: Luer Tip (no needle) Model No.: 701LT Gauge: N/A Capacity (µl): 10
Price $36.00
Online Price
$30.46
Quantity
EACH
TS Part No. HAMILTON 80330
Old Part No. S7900-7
Mfg Part No. 80330
Description Style: Removable Needle Model No.: 701RN Gauge: 26s Capacity (µl): 10
Price $40.00
Online Price
$33.85
Quantity
EACH
TS Part No. HAMILTON 80336
Old Part No. S8020-2
Mfg Part No. 80336
Description Style: Small Removal Needle Model No.: 701RN Gauge: 26s Capacity (ul): 10
Price $215.40
Online Price
$215.40
Quantity
PACK of 6
TS Part No. HAMILTON 80400
Old Part No. S7900-2
Mfg Part No. 80400
Description Style: Cemented Needle Model No.: 702N Gauge: 22s Capacity (µl): 25
Price $35.00
Online Price
$29.62
Quantity
EACH
TS Part No. HAMILTON 80400
Old Part No. S7900-2
Mfg Part No. 80400
Description Style: Cemented Needle Model No.: 702N Gauge: 22s Capacity (µl): 25
Price $35.00
Online Price
$29.62
Quantity
EACH
TS Part No. HAMILTON 80401
Old Part No.
Mfg Part No. 80401
Description Style: Luer Tip (no needle) Model No.: 702LT Gauge: N/A Capacity (µl): 25
Price $38.00
Online Price
$32.15
Quantity
EACH
TS Part No. HAMILTON 80430
Old Part No. S7900-8
Mfg Part No. 80430
Description Style: Removable Needle Model No.: 702RN Gauge: 22s Capacity (µl): 25
Price $55.00
Online Price
$46.54
Quantity
EACH
TS Part No. HAMILTON 80500
Old Part No. S7900-3
Mfg Part No. 80500
Description Style: Cemented Needle Model No.: 705N Gauge: 22s Capacity (µl): 50
Price $35.00
Online Price
$29.62
Quantity
EACH
TS Part No. HAMILTON 80501
Old Part No. S7900-15
Mfg Part No. 80501
Description Style: Luer Tip (no needle) Model No.: 705LT Gauge: N/A Capacity (µl): 50
Price $40.00
Online Price
$33.85
Quantity
EACH
TS Part No. HAMILTON 80530
Old Part No. S7900-9
Mfg Part No. 80530
Description Style: Removable Needle Model No.: 705RN Gauge: 22s Capacity (µl): 50
Price $48.00
Online Price
$40.62
Quantity
EACH
TS Part No. HAMILTON 80600
Old Part No. S7900-4
Mfg Part No. 80600
Description Style: Cemented Needle Model No.: 710N Gauge: 22s Capacity (µl): 100
Price $40.00
Online Price
$33.85
Quantity
EACH
TS Part No. HAMILTON 80601
Old Part No. HAM 80601
Mfg Part No. 80601
Description Style: Luer Tip (no needle) Model No.: 710LT Gauge: N/A Capacity (µl): 100
Price $54.00
Online Price
$45.69
Quantity
EACH
TS Part No. HAMILTON 80630
Old Part No. S7900-10
Mfg Part No. 80630
Description Style: Removable Needle Model No.: 710RN Gauge: 22s Capacity (µl): 100
Price $55.00
Online Price
$46.54
Quantity
EACH
TS Part No. HAMILTON 80700
Old Part No. S7900-5
Mfg Part No. 80700
Description Style: Cemented Needle Model No.: 725N Gauge: 22s Capacity (µl): 250
Price $47.00
Online Price
$39.77
Quantity
EACH
TS Part No. HAMILTON 80701
Old Part No. S7900-17
Mfg Part No. 80701
Description Style: Luer Tip (no needle) Model No.: 725LT Gauge: N/A Capacity (µl): 250
Price $54.00
Online Price
$45.69
Quantity
EACH
TS Part No. HAMILTON 80730
Old Part No. S7900-11
Mfg Part No. 80730
Description Style: Removable Needle Model No.: 725RN Gauge: 22s Capacity (µl): 250
Price $70.00
Online Price
$59.23
Quantity
EACH
TS Part No. HAMILTON 80800
Old Part No. S7900-6
Mfg Part No. 80800
Description Style: Cemented Needle Model No.: 750N Gauge: 22s Capacity (µl): 500
Price $51.00
Online Price
$43.15
Quantity
EACH
TS Part No. HAMILTON 80801
Old Part No. HAM 80801
Mfg Part No. 80801
Description Style: Luer Tip (no needle) Model No.: 750LT Gauge: N/A Capacity (µl): 500
Price $56.00
Online Price
$47.38
Quantity
EACH
TS Part No. HAMILTON 80801
Old Part No. HAM 80801
Mfg Part No. 80801
Description Style: Luer Tip (no needle) Model No.: 750LT Gauge: N/A Capacity (µl): 500
Price $56.00
Online Price
$47.38
Quantity
EACH
TS Part No. HAMILTON 80830
Old Part No. S7900-12
Mfg Part No. 80830
Description Style: Removable Needle Model No.: 750RN Gauge: 22s Capacity (µl): 500
Price $73.00
Online Price
$61.77
Quantity
EACH
TS Part No. HAMILTON 87900
Old Part No. S7900-A
Mfg Part No. 87900
Description Style: Cemented Needle Model No.: 75N Gauge: 26s Capacity (µl): 5
Price $35.00
Online Price
$32.50
Quantity
EACH
TS Part No. HAMILTON 87930
Old Part No.
Mfg Part No. 87930
Description Style: Removable Needle Model No.: 75RN Gauge: 26s Capacity (µl): 5
Price $55.00
Online Price
$51.07
Quantity
EACH
TS Part No. HAMILTON 87930
Old Part No.
Mfg Part No. 87930
Description Style: Removable Needle Model No.: 75RN Gauge: 26s Capacity (µl): 5
Price $55.00
Online Price
$51.07
Quantity
EACH

Add to cart